查看: 2027|回复: 2
打印 上一主题 下一主题

求饭饭大大等高人把这个球场替代路易斯二世(或科乐美)球场.渴求··

[复制链接]
跳转到指定楼层
1#
发表于 2011-12-14 23:58 | 只看该作者 |只看大图 回帖奖励 |倒序浏览 |阅读模式
求饭饭大大等高人把这个球场替代路易斯二世(或科乐美)球场.渴求··
这个是酋长球场替代的是巨龙球场,想把这个酋长球场替代路易斯二世或者科乐美,但小弟不知道对应的编号,求大大们帮忙改下,谢谢了~
2#
发表于 2011-12-15 01:12 | 只看该作者
1.方法一 手动

map by boonaun

2.方法二 球场装换工具
PES 2012 Stadium switcher by toxic_nova
download:  
http://www.file-upload.net/downl ... tcher-v1_0.zip.html

PES 2012 Stadium switcher
With PES 2012 Stadium switcher you can change the stadiums. The difference to other tools I could find is that you can add stadium by yourself.
The Kitserver is a must have for this tool.


IMPORTANT NOTE:

I do not take over for damages caused by this Software. (except with intent caused damages)

This program is written with Delphi 6 Personal.
This software is completely for free. It is not allowed to receive any direct or
indirect compensation for this software.
All Rights stay with Borland Sofware Corp. and his partners.



user manual:
with the menu you have first to set the folders
1. select the Kitserver IMG folder where the stadiums should be copied
-e.g.: "C:\Program Files (x86)\KONAMI\Pro Evolution Soccer 2012\kitserver12\example-root\img\"
-IMPORTANT: you have to choose the "img" folder
2. select the folder where you have your stadiums
-e.g.: "C:\Program Files (x86)\KONAMI\Pro Evolution Soccer 2012\kitserver12\GDB\Stadiums\"
-the stadium folders should look like this: "[GER] München, Allianz Arena\dt07.img"
3. select the stadium you want to copy by checking the entry in right box
4. select the stadium you want to change
-if you choose "All Stadiums" this will take some time
5. click Accept Stadium and have fun (when all datas are copied you will hear a little beep)


here a little picture so that you can see how it have to be


and a videotuto:
http://www.vidup.de/v/qAk1e/

You can also add a preview picture(preview.bmb) and a Info.txt.
The Picture can be .bmp or .jpg.
For the Info.txt I add an example(Info.txt).
Both should be added in the stadiumfolder. For the example I used above:
"C:\Program Files (x86)\KONAMI\Pro Evolution Soccer 2012\kitserver12\GDB\Stadiums\[GER]Allianz Arena, München\"

if you want you can save your settings...these settings will be load at restart

There is a little problem with the kitserver by using this tool. The Kitserver can only read files wich are in the Kitserver IMG folder if they
are existing at PES startup. I know two solutions for this problem:
1. change the stadiums you want to change in your session before you start PES. After this you can change this stadium while PES is running
(important is only that the files for the Stadium are in the IMG folder)
2. export the stadium files out of dt07.img in your kitserver IMG folder (thats a bit more than 540mb)

If the stadium you want to overwrite is still running in background of PES2012, as example in menu background, then the Stadium switcher can not overwrite this stadium because the files are in use.
To solve this problem you should change the menu, maybe mainmenu, and try again or shut PES down, overwrite the stadium, and start PES again.
For the daily routine in competitions (ML, BaL) you should overwrite the stadium minimum a day before your game is.


A special thank goes to Juce, everyone who is working on Kitserver and all stadiummakers who compelled me to make this tool with their great work


If someone will find errors in config.ini or with the tool I would be happy if he post them
3#
 楼主| 发表于 2011-12-15 23:18 | 只看该作者
回复 2# erica2004


  再次 感谢~按照你的方法已经改好了~!
您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表